A Complete TV Wall Mount Buying Guide – MountingDream

A Complete TV Wall Mount Buying Guide

26 comments

Hanging the TV on the wall is always a clever decor idea - it saves up spaces, gives a better watching experience, and different from a heavy piece of furniture, a TV mounting pack is more cost-effective than a TV table.

The only challenge is choosing a TV wall mount - there are thousands of models, sizes and prices. In this blog, we will answer these questions and make a clear guide to buying a TV wall mount.

This is the top 4 questions you have to consider in purchasing a TV wall mount:

  1. What kind of wall you are going to mount the TV on?
  2. What specs your TV is?
  3. What watching experience you are going to have (How flexible the TV mount will be)?
  4. How much I should pay for a TV wall mount?

TV wall mount on wood studs - picture via Mounting Dream

 1. What wall you are going to mount TV with?

There are always 2 places people install the TV with: the concrete wall or wooden frames (studs). In most western countries like America or Canada, people usually mount the TV on the wood studs that underneath the drywall. Depending on different wall types, manufacturers prepare different hardware accessories. Therefore, when choosing a TV mount for studs, it is better to read through the description and make sure it supports “single stud installation” or “suits studs spacing”. 

With a lightweight TV screen, a single stud mount, like Mounting Dream MD2413-MX, is one of the best choices. If you have a larger screen and prefer a heavy-duty one, go for longwall plate ones, such as Mounting Dream MD2268-LK. It designs for easy TV centering, fits 16", 18", 24" studs and the loading capacity is 132 lbs.

will this mount fit my TV? - picture via Mounting Dream MD2380

 2. What specs your TV is?

First of all, make sure both the size and weight of your screen fit the TV wall mount, which is usually shows in the title if you are viewing them in online shops. The next steps are to measure the VESA and checkout the potential cable blockage.

Where can I find the VESA size?

You can refer to the specifications in the TV manual but the fastest way is just manually measuring it. Locating the four holes in the back of your television, you just need to measure these from left to right and top to bottom. (oneforall.com, the VESA Mounting Standard Explained, 2019)

How to measure the VESA -  picture via oneforall.com

Please avoid cables blockage. We highly suggest contacting the customer service before purchasing if you are not sure about the cable blockage. If you get a mount that unfortunately blocks the cables, try to use the spacers to create a little bit of space for them. If it doesn’t work, please find help from the manufacturer, the most effective solution is to exchange your wall mount set.

3. How flexible your TV wants to be?

Now you made clear of your wall type, keep the TV mode, VESA in mind and avoid cable blockage. The final step matters to your watching experience. There are 3 types of TV wall mount: low profile TV wall mount (fixed on the wall), tilting wall mount, and full-motion TV wall mount (able to tilt, swivel, rotation and extend).

3 main types of TV wall mounts - picture via douglastv.ie

For most of the host, whose key requirement is to hang up the TV and saves spaces, a low profile TV mount works well. It is easy to install, settles the TV properly and it barely needs any maintenance. However, in recent 5 years, according to the Sales Report 2014-2018 from Mounting Dream, the tilting and full-motion TV mounts are becoming the stars. Indeed, they are more flexible, meet the need on different occasions and friendly to home cinemas.

4. How much does a TV mount cost?

Now you know basic rules in choosing a TV wall mount. Generally, the more flexible the mount is, the more it costs. And usually, an online store is much cheaper than shops or hypermarkets. A low profile one costs around $20 online; a tilting TV wall mount costs around $27 and based on amazon USA, the full-motion TV bracket is not expensive at all - you can have it with a budget around $45. The price may vary according to the tilting angle, material, fit sizes and more. One of the top sellers of Mounting Dream, the full-motion model MD2380 costs less than $50, which fits for most 32-55 inch flat screen TVs. If you want to know more about the difference, like, "What is the difference between $15 TV Wall Mounts and $85 Mounts?", please just click the link to know more. 

To sum up, choosing a TV wall mount turns into an easy task after understanding your wall type and TV type. For any inquires, you can get in touch with the customer service and they will offer recommendations according to your detailed requirement. Please help to share the blog if it helps.

26 comments

  • Posted on by James

    Good day,

    I have a Sony Bravia VL LCH HDTV model KDL-46VL150. Will your mounts work with this TV?

    Thank you,
    James

  • Posted on by Jose Saenz
    Need brackets that goes on TV only model number MD 22298
  • Posted on by Scott M Tomczak
    i have a 50" Sanyo that i want to mount in a camper, so it will have to withstand going down the road.
  • Posted on by margaret a curello
    who would I get to install the device for full motion 43" flat screen t.v……would need to be able to do carpentry work as well.
  • Posted on by Jeff Rossi1
    Anyone stock your flat bracket for a 75" sony 400×300 vesa in Orange County CA. ? 949 632-8120 need quick.

    Thanks

Leave a comment

All blog comments are checked prior to publishing
You have successfully subscribed!

Advanced: Reporting custom events

This webpage is meant to be used in conjunction with the How to track custom events with UET Microsoft Advertising Help article.

We have installed a JavaScript Microsoft Advertising UET tag tracking code in the body of this webpage. This code has been customized to report several custom events -- in this case, button clicks. To see how we did it, right-click in the webpage and then click View source or View page source depending on your browser. Our UET tag tracking code is right after the <body> tag, but you can put yours anywhere in your webpage’s head or body sections (either before the closing head tag or before the closing body tag).


This webpage’s custom events:









As the webpage loads, it triggers the UET tag, resulting in a number of HTTP requests. The most important request is to "bat.bing" (the one that looks like "http://bat.bing.com/action/0?ti=..."). This request tells Microsoft Advertising about the user visits to your webpage.

You can use third-party tools such as Fiddler to monitor all the requests that your browser is making when this webpage loads. In the first three examples, we are sending static values for custom events and variable revenue to show how it works. However, in most cases, you will want to send dynamic values for the custom event and variable revenue parameters depending on which action the user has triggered on your webpage. The last example shows you how to send dynamic values by reading values from your webpage (JavaScript variables, JavaScript functions, HTML elements, etc.). How to implement this yourself is up to you, based on how your website works.


Note: A JavaScript UET tag is required to ensure you have access to the full functionalities of conversion tracking and remarketing. If you are using a non-JavaScript tag, please switch over to a JavaScript tag. Learn how to create a JavaScript UET tag

Learn more: What is UET and how can it help me?